Gauges System Description

Gauges System Description

Driver Feedback System

The gauge control module receives the Eco drive profile data that is accumulated in the PCM via F-CAN Fuel And Emissions System Description - Ecological Drive Assist System, and the Eco drive information is displayed on the ambient meter behind the speedometer segments and the Eco guide feedback monitor.






Real-Time Driving Information Display

The real-time driving information display shows the Eco drive profile data from the PCM with the ambient meter and the Eco score and the Eco drive bar in the Eco guide feedback monitor Fuel And Emissions System Description - Ecological Drive Assist System.






Eco Guide Feedback Monitor on the Multi-Information Display

Pressing the ECON button causes the ECON indicator ON/OFF to appear for 6 seconds in the multi-information display, indicating which ECON mode is entered into the multi-information display, and the Eco indicator in the gauge control module displays on/off when the ECON mode is turned from OFF(ON) to ON(OFF).

Then the multi-information display screen returns to the previous screen. Turning the ignition switch to LOCK (0) displays the Eco score (Eco drive profile data) and the Eco stage indicator (Lifetime Points) for 6 seconds.

Note: The Eco score and the Eco stage indicator are not displayed unless the vehicle has been idle for 3 minutes or driven at least 218 yards.






Eco stage

When the lifetime points reach the prescribed level, the multi-information display shows the Eco stage up/down indicator for 6 seconds from when the ignition switch is turned off. The multi-information display then displays the Eco score for 6 seconds. When you advance up a stage, it displays for 12 seconds.