Wheel Speed Sensor: Service and Repair

Wheel Speed Sensor Replacement

Front

1. Turn the ignition switch to LOCK (0).

2. Remove the front wheels.

3. Remove the grommet (A), then disconnect the wheel speed sensor connector (B).





4. Remove the bolt and the bracket (C), the clip (D), and the wire guide rubber (E).

5. Remove the bolt and the wheel speed sensor (F).

6. Install the wheel speed sensor in the reverse order of removal, and note these items:

- Do not twist the sensor wires.
- If the wheel speed sensor comes in contact with the hub bearing unit, it is faulty.
- Make sure there is no debris in the sensor mounting hole.

Rear

1. Turn the ignition switch to LOCK (0).

2. Remove the rear wheels.

3. Release the connector holding clamps (A), then disconnect the wheel sensor connector (B).





4. Remove the clip (C) and the wire guide rubbers (D).

5. Remove the bolt and the wheel speed sensor (E).

6. Install the wheel speed sensor in the reverse order of removal, and note these items:

- Do not twist the sensor wires.
- If the wheel speed sensor comes in contact with the hub bearing unit, it is faulty.
- Make sure there is no debris in the sensor mounting hole.