P0130

DTC P0130 O2 Sensor Circuit Malfunction




CIRCUIT DIAGRAM




INSPECTION PROCEDURE

TROUBLESHOOTING HINTS
1. If the heated oxygen sensor is defective abnormally, high emissions may occur.
2. If the heated oxygen sensor check has been normal, but the sensor output voltage is out of specification, check the following items related to the air fuel ratio control system.
- Faulty injector.
- Air leaks in the intake manifold.
- Faulty mass air flow sensor, EVAP valve and engine coolant temperature sensor.
- Wiring connection problem.
3. When O2 sensor output voltage is maintained as following for above 50 seconds.
- Upstream: 0.4V - 0.6V
- Downstream : 0.4V - 0.5V

When the lean/rich period is above 2.6 seconds in the condition that fully warm-up engine is 2,000 - 3,000 rpm and engine is above middle load.