Front Stabilizer

FRONT STABILIZER

FSU-36 Exploded View:

Removal and Installation

REMOVAL
1. Remove tires with power tool.
2. Remove under cover with power tool.
3. Remove stabilizer connecting rod with power tool.

CAUTION: Apply a matching mark to identify the installation position.

4. Remove stabilizer clamp and stabilizer bushing.
5. Remove stabilizer bar.

INSTALLATION
Note the following, and install in the reverse order of removal.
^ Check the matching mark when installing.
^ Tighten the mounting nut to the specified torque while holding a hexagonal part of stabilizer connecting rod side.

Inspection

INSPECTION AFTER REMOVAL
Check stabilizer bar, stabilizer connecting rod, stabilizer bushing and stabilizer clamp for deformation, cracks or damage. Replace it if necessary.