Direct Clutch
DIRECT CLUTCHTM-267 Exploded View:
Disassembly
1. Using a flat-bladed screwdriver, remove snap ring from direct clutch drum.
2. Remove drive plates, driven plates, dish plate and retaining plates from direct clutch drum.
Assembly
1. Install drive plates, driven plates, dish plate and retaining plates in direct clutch drum.
CAUTION: Check the order of plates.
1: Snap ring
2: Retaining plate
3: Drive plate
4: Driven plate
5: Dish plate
5/4: Drive plate / Driven plate
2. Using a flat-bladed screwdriver, install snap ring in direct clutch drum.
Inspection
Check the following, and replace direct clutch assembly if necessary.
^ Direct Clutch Snap Ring
Check for deformation, fatigue or damage.
^ Direct Clutch Drive Plates and Driven Plates
Check facing for burns, cracks or damage.
^ Direct Clutch Dish Plate and Retaining Plates
Check facing for burns, cracks or damage.