Removal And Installation

WASHER TANK


Removal and Installation


REMOVAL





1. Remove the clip (A).

Arrow :Vehicle Front

2. Pull out the washer tank inlet (1) from the washer tank.
3. Remove the fender protector RH (front). Exploded View.
4. Remove the engine lower cover. Exploded View.
5. Disconnect washer pump connector.
6. Disconnect the washer level switch connector.
7. Remove front washer tube and rear washer tube.
8. Remove washer tank mounting bolts.
9. Remove washer tank from the vehicle.

INSTALLATION
Note the following, and install in the reverse order of removal.

CAUTION:
Add water up to the top of the washer tank inlet after installing. Check that there is no leakage.