Brake Pedal Assy: Adjustments

BRAKE PEDAL

Adjustment


BRAKE PEDAL HEIGHT

1.Remove instrument lower panel LH. Refer to "Removal and Installation" Instrument Lower Panel LH.
2.Disconnect the stop lamp switch and ASCD cancel switch harness connectors.
3.Turn the stop lamp switch and ASCD cancel switch 45� counterclockwise.





4.Loosen the input rod lock nut (1). Adjust the brake pedal height to the specification.

CAUTION:
- Check the height with the floor trim removed.
- The threaded end of the input rod (2) must project to the inner side (L) of the clevis (3).





Brake pedal height (H1): Refer to "Brake Pedal" Specifications.
5.Tighten the input rod lock nut to specification. Refer to "Exploded View" Exploded View.
6.Check the brake pedal for smooth operation.

CAUTION:
The stop lamp must turn off when the brake pedal is released.

STOP LAMP SWITCH AND ASCD CANCEL SWITCH

1.Remove instrument lower panel LH. Refer to "Removal and Installation" Instrument Lower Panel LH.
2.Disconnect the stop lamp switch and ASCD cancel switch harness connectors.
3.Turn the stop lamp switch and ASCD cancel switch 45� counterclockwise.





4.With the threaded ends of the stop lamp switch (2) and ASCD
cancel switch (1) contacting the pedal bracket (3), turn the switches 45�
clockwise to lock in place. Check that both the stop lamp switch (2) and ASCD cancel switch (1) contact ends to brake pedal bracket (3) clearance (A) are within specification.

CAUTION:
- Make sure that the clearance (A) between the brake pedal bracket (3), stop lamp switch (2) and the ASCD cancel switch (1) contact ends are within specification.
- The stop lamp must turn off when the brake pedal is released.


Clearance (A): Refer to "Brake Pedal" Specifications.
Revision: March 20122013 Infiniti JX