DTC 52

Vehicle Speed Signal
MALFUNCTION CODE NO. 52
1. CHECK SELF-DIAGNOSTIC RESULTS
1. Turn ignition switch OFF.
2. Connect CONSULT-II and CONSULT-II CONVERTER to the data link connector.
3. Turn the ignition switch ON.
4. Touch START (NISSAN BASED VHCL).
5. Touch BCM on SELECT SYSTEM screen.

NOTE: If BCM is not indicated, go to GI-38, "CONSULT-II Data Link Connector (DLC) Circuit". Electrical Diagrams

6. Touch BCM C/U on SELECT SYSTEM screen.
7. Touch SELF-DIAG RESULTS on SELECT DIAG MODE screen.
8. Check display contents in self-diagnostic results.
Is the CAN COMM CIRCUIT displayed in the self-diagnosis display?
YES >> Perform trouble diagnosis for CAN communication system. GO TO LAN-3, "Precautions When Using CONSULT-II". Precautions When Using CONSULT-II
NO >> Check combination meter.