P1715

DTC P1715 INPUT SPEED SENSOR (TURBINE REVOLUTION SENSOR)

Description
ECM receives turbine revolution sensor signal from TCM through CAN communication line. ECM uses this signal for engine control.




CONSULT-II Reference Value in Data Monitor Mode

On Board Diagnosis Logic

NOTE:
- If DTC P1715 is displayed with DTC U1000, U1001 first perform the trouble diagnosis for DTC U1000, U1001. Refer to EC-163, "DTC U1000, U1001 CAN COMMUNICATION LINE". Engine Control System
- If DTC P1715 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to EC-166, "DTC U1010 CAN COMMUNICATION". Engine Control System
- If DTC P1715 is displayed with DTC P0605, first perform the trouble diagnosis for DTC P0605. Refer to EC-498, "DTC P0605 ECM". P0605
- If DTC P1715 is displayed with DTC P0340 or P0345 first perform the trouble diagnosis for DTC P0340 or P0345. Refer to EC-385, "DTC P0340, P0345 CMP SENSOR (PHASE)". P0340




The MIL will not lights up for this diagnosis.

Diagnostic Procedure:

Diagnostic Procedure