How to Erase DTC (No Tools)

HOW TO ERASE DTC (NO TOOLS)
The A/T CHECK indicator lamp is located on the instrument panel.
1. If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 10 seconds and then turn it ON (engine stopped) again.
2. Perform AT-97, "TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS)". TCM Self-Diagnostic Procedure (No Tools)
(The engine warm-up step can be skipped when performing the diagnosis only to erase the DTC.)
3. Perform OBD-II SELF-DIAGNOSTIC PROCEDURE (No tools). Refer to EC-61, "How to Erase DTC". With Manufacturer's Scan Tool