B2118
B2118 TILT SENSORDescription
- The tilt sensor is installed to the steering column assembly.
- The resistance of tilt sensor is changed according to the up/down position of steering column.
- The terminal voltage of automatic drive positioner control unit will be changed according to a change of tilt sensor resistance. Automatic drive positioner control unit calculates the tilt position from the voltage.
DTC Logic
DTC DETECTION LOGIC
Step 1-2:
DTC CONFIRMATION PROCEDURE
Step 1-2:
Step 2 (Continued)-6:
Step 6 (Continued)-7:
Diagnosis Procedure