P0850
P0850 PNP SWITCHDescription
When the selector lever position is P or N (A/T), Neutral position (M/T), park/neutral position (PNP) switch is ON.
ECM detects the position because the continuity of the line (the ON signal) exists.
DTC Logic
DTC DETECTION LOGIC
Step 1-4:
Step 4 (Continued)-5:
DTC CONFIRMATION PROCEDURE
Step 1:
Component Function Check
Step 1-4:
Step 4 (Continued)-9:
Step 9 (Continued)-12:
Diagnosis Procedure