Cannot Be Changed to Manual Mode
Cannot Be Changed to Manual ModeSYMPTOM: Does not change to manual mode when manual shift gate is used.
DIAGNOSTIC PROCEDURE
1.CHECK MANUAL MODE SWITCH
Check manual mode switch. Refer to AT-156. P1815
OK or NG
OK >> GO TO 2.
NG >> Repair or replace damaged parts.
2.CHECK SELF-DIAGNOSTIC RESULTS
With CONSULT-III
^ Select "SELF-DIAG RESULTS" mode for "TRANSMISSION" with CONSULT-III.
Without CONSULT-III
^ Perform the self-diagnosis. Refer to AT-92, "Diagnosis Procedure without CONSULT-III". Diagnosis Procedure Without Consult-III
Is any malfunction detected by self-diagnostic results?
YES >> Check malfunctioning system. Refer to AT-85, "CONSULT-III Function (TRANSMISSION)", AT-92, "Diagnosis Procedure without CONSULT-III".
Consult-III Function (Transmission)
Diagnosis Procedure Without Consult-III
NO >> INSPECTION END