Engine Cannot Be Started In "P" or "N" Position

Engine Cannot Be Started in "P" or "N" Position

SYMPTOM:
^ Engine cannot be started with selector lever in "P" or "N" position.
^ Engine can be started with selector lever in "D" or "R" position.

DIAGNOSTIC PROCEDURE

1.CHECK PNP SWITCH CIRCUIT

With CONSULT-III
^ Select "SELF-DIAG RESULTS" mode for "TRANSMISSION" with CONSULT-III.

Without CONSULT-III
^ Perform the self-diagnosis. Refer to AT-92, "Diagnosis Procedure without CONSULT-III". Diagnosis Procedure Without Consult-III

Do the self-diagnostic results indicate PNP switch?
YES >> Check malfunctioning system. Refer to AT-103. P0705
NO >> GO TO 2.

2.CHECK A/T POSITION
Check A/T position.
OK or NG
OK >> GO TO 3.
NG >> Adjust A/T position. Refer to AT-202, "Adjustment of A/T Position". Adjustments

3.CHECK STARTING SYSTEM
Check starting system. Refer to SC-8. Description and Operation
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.