In "P" Position, Vehicle Moves When Pushed

In "P" Position, Vehicle Moves When Pushed

SYMPTOM: Even though the selector lever is set in "P" position, the parking mechanism is not actuated, allowing the vehicle to be moved when it is pushed.

DIAGNOSTIC PROCEDURE

1.CHECK PNP SWITCH CIRCUIT

With CONSULT-III
^ Select "SELF-DIAG RESULTS" mode for "TRANSMISSION" with CONSULT-III.

Without CONSULT-III
^ Perform the self-diagnosis. Refer to AT-92, "Diagnosis Procedure without CONSULT-III". Diagnosis Procedure Without Consult-III

Do the self-diagnostic results indicate PNP switch?
YES >> Check malfunctioning system. Refer to AT-103. P0705
NO >> GO TO 2.

2.CHECK A/T POSITION
Check A/T position.
OK or NG
OK >> GO TO 3.
NG >> Adjust A/T position. Refer to AT-202, "Adjustment of A/T Position". Adjustments

3.CHECK PARKING COMPONENTS
Check parking components. Refer to AT-222, "Parking Component (2WD Models Only)" (VQ35DE models for 2WD), AT-275 (VQ35DE models for AWD), AT-222, "Parking Component (2WD Models Only)" (VK45DE models). Service and Repair
OK or NG
OK >> GO TO 4.
NG >> Repair or replace damaged parts.

4.CHECK A/T FLUID CONDITION
1. Remove oil pan.
2. Check A/T fluid condition. Refer to AT-44, "How to Perform Trouble Diagnosis for Quick and Accurate Repair". How to Perform Trouble Diagnosis For Quick and Accurate Repair
OK or NG
OK >> INSPECTION END
NG >> Check malfunction items. If any items are damaged, repair or replace damaged parts. Refer to AT-61, "Symptom Chart" (Symptom No.65). Symptom Table