Initial Inspection and Diagnostic Overview
WARNING CHIME
Trouble Diagnosis
HOW TO PERFORM TROUBLE DIAGNOSIS
1. Confirm the symptom and customer complaint.
2. Understand the outline of system. Refer to Description and Operation.
3. Perform the preliminary inspection. Refer to "PRELIMINARY INSPECTION".
4. Referring to trouble diagnosis chart, make sure the cause of the malfunction and repair or replace applicable parts. Refer to "SYMPTOM CHART".
5. Does warning chime system operate normally? If yes, GO TO 6. If no, GO TO 3.
6. INSPECTION END
PRELIMINARY INSPECTION
1.CHECK BCM (CONSULT-III)
Perform self-diagnosis of BCM. Refer to Scan Tool Testing and Procedures.
Self-diagnostic results content
No malfunction detected GO TO 2.
Malfunction detected Check applicable parts, and repair or replace corresponding parts.
2.CHECK UNIFIED METER AND A/C AMP.
(CONSULT-III)
Perform self-diagnosis of unified meter and A/C amp. Refer to Unified Meter and A/C AMP.
Self-diagnostic results content
No malfunction detected INSPECTION END
Malfunction detected Check applicable parts, and repair or replace corresponding parts.
SYMPTOM CHART
