Removal and Installation

HEADLAMP (FOR USA) - XENON TYPE -


Removal and Installation







REMOVAL

CAUTION:
Disconnect the battery negative terminal or remove the fuse.
1. Remove front bumper. Refer to Standard Type.
2. Remove front bumper retainer (upper). Refer to Standard Type.
3. Remove front bumper clips. Refer to Standard Type.
4. Remove headlamp mounting bolts and nuts.
5. Remove plastic bumper bracket, then pull headlamp toward vehicle front, disconnect connector, and remove headlamp.

INSTALLATION
Note the following, and installation is the reverse order of removal.

NOTE:
After installation, perform aiming adjustment. Refer to Adjustments.