Glove Compartment: Service and Repair

INSTRUMENT PANEL ASSEMBLY


GLOVE BOX : Removal and Installation


CAUTION:
When removing, always use a remover tool that is made of plastic.

REMOVAL
1. Remove glove box.
- Remove damper pin to left side.





- Pull up glove box.
2. Remove instrument passenger lower cover.
- Pull downward, disengaged pawls.
- Pull back instrument passenger lower cover.
- Disconnect harness connector.
3. Remove instrument side finisher RH.
- Insert a remover into lower space.
- Pull the instrument side finisher RH crosswise.
4. Remove glove box cover fixing screws with power tool.

INSTALLATION
Install in the reverse order of removal.