Instrument Panel

INSTRUMENT PANEL ASSEMBLY


INSTRUMENT PANEL : Removal and Installation


CAUTION:
When removing, always use a remover tool that is made of plastic.

REMOVAL





1. Remove cup holder.
- Pull up to remove cup holder.





2. Remove switch finisher.
- Remove switch finisher fixing screws.
- Disconnect harness connector.





3. Remove A/T console finisher.
- Place the selector lever in [D] position.
- Remove selector lever knob. A/T Shift Selector Removal and Installation.
- Lift up backside and pull back.
- Disconnect harness connectors.










4. Remove cluster lid C.
- Remove cluster lid C fixing screws.
- Pull back cluster lid C.
- Disconnect harness connectors.

Square: Metal clip
Circle: Pawl





5. Remove console rear finisher.
- Insert a remover into upper space of console rear finisher.
- Pull back console rear finisher.

Square: Metal clip

6. Remove center console fixing screws with power tool.
- Pull up center console.
- Disconnect harness connector.





7. Remove glove box.
- Remove damper pin to left side.
- Pull up glove box.
8. Remove instrument passenger lower cover.
- Pull downward, disengaged pawls.
- Pull back instrument passenger lower cover.
- Disconnect harness connector.
9. Remove instrument side finisher (RH).
- Insert a remover into lower space.
- Pull the instrument side finisher (RH) crosswise.
10. Remove glove box cover with power tool.





11. Remove instrument finisher B.
- Remove instrument finisher B fixing screws.
- Insert a remover into right space.

Circle: Pawl
Triangle: Clip

12. Remove front pillar garnish (LH/RH). Locations.





13. Remove instrument side finisher (LH).
- Insert a remover into lower space.
- Pull the instrument side finisher (LH) crosswise.

Circle: Pawl
Triangle: Clip





14. Remove instrument driver lower panel.
- Remove hood opener mounting bolt. Service and Repair.
- Pull back.
- Disconnect harness connectors.

Circle: Pawl
Square: Metal clip





15. Remove instrument finisher A.
- Insert a remover into upper space.
- Pull back instrument finisher A.

Circle: Pawl
Triangle: Clip





16. Remove instrument finisher C.
- Insert a remover into upper space.
- Pull back instrument finisher C.

Circle: Pawl
Triangle: Clip





17. Remove cluster lid A
- Pull back.

Triangle: Clip

18. Remove combination meter. Removal and Installation of Combination Meter.
19. Remove steering column cover with power tool.
20. Remove upper ventilator grille. Service and Repair.





21. Remove center ventilator grille.
- Remove center ventilator grille fixing screws.
- Insert a remover into rear lower space.
- Pull up.

Circle: Pawl
Triangle: Clip

22. Remove multifunction switch. With Mobile Entertainment System.
23. Remove front display unit. With Mobile Entertainment System.
24. Remove AV control unit. With Mobile Entertainment System.
25. Remove front passenger air bag module mounting bolt and disconnect harness connector. Front Passenger Air Bag Module.





26. Remove side ventilator grille (RH/LH).
- Insert a remover into lower space.
- Pull back.

Circle: Pawl
Square: Metal clip





27. Remove front defroster grille.
- Insert a remover into back space.
- Pull up front defroster grille.
- Disconnect harness connector.

Circle: Pawl

28. Remove instrument panel assembly fixing screws, and then remove instrument panel assembly.

CAUTION:
When removing instrument panel, 2 workers are required so as to prevent it from dropping.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- To install, confirm locating pins on back of instrument panel are completely inserted into holes on vehicle.
- Never leave harness stuck when installing.