Tail Lamp: Service and Repair

PARKING, LICENSE PLATE AND TAIL LAMPS


Removal and Installation


REMOVAL

CAUTION:
Disconnect the battery negative terminal or remove the fuse.
1. Remove trunk lid finisher inner. .





2. From the trunk room inside, push a lamp to outside while pushing a resin clip (A).
3. Disconnect connector and remove license plate lamp (1).

INSTALLATION
Installation is the reverse order of removal.





REAR COMBINATION LAMP


Removal and Installation












REMOVAL

CAUTION:
Disconnect the battery negative terminal or remove the fuse.
1. Remove trunk side finisher. .
2. Disconnect rear combination lamp connector.
3. Remove rear combination lamp finisher.
4. Remove rear combination lamp mounting bolts.
5. Pull the rear combination lamp toward rear of the vehicle and remove from the vehicle.
6. Remove seal packing from the vehicle.

INSTALLATION
Installation is the reverse order of removal.

CAUTION:
Seal packing cannot be reused.