Removal and Installation

IGNITION COIL


Removal and Installation


REMOVAL
1. Remove engine room cover (RH and LH). Component.
2. Remove engine cover with power tool. Component Removal and Installation.
3. Remove air cleaner case and air duct. Component Removal and Installation.
4. Move aside harness, harness bracket, and hoses located above ignition coil.
5. Remove electric throttle control actuator. Component.
6. Disconnect harness connector from ignition coil.
7. Remove ignition coil.

CAUTION:
Never shock ignition coil.

INSTALLATION
Install in the reverse order of removal.