Shifter A/T: Adjustments

SHIFT CONTROL SYSTEM


Adjustment of A/T Position


2WD MODELS





1. Loosen nut (2) of pivot pin (1).
2. Place transmission range switch and selector lever in "P" position.
3. While pressing lower lever (3) toward rear of vehicle (in "P" position direction), tighten nut to specified torque. Control Rod Removal and Installation.

AWD MODELS





1. Loosen nut (2) of bracket (1).
2. Place transmission range switch and selector lever in "P" position.
3. While pressing lower lever (3) toward rear of vehicle (in "P" position direction), tighten nut to specified torque. Control Rod Removal and Installation.