Diagnosis Procedure

KEY SLOT


Diagnosis Procedure

1.CHECK KEY SLOT POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect key slot connector.
3. Check voltage between key slot harness connector and ground.





Is the inspection result normal?
YES - GO TO 2.
NO-1 - Check 10 A fuse [No. 6 and 9 located in the fuse block (J/B)].
NO-2 - Check harness for open or short between key slot and fuse.
2.CHECK KEY SLOT GROUND CIRCUIT
Check continuity between key slot harness connector and ground.





Is the inspection result normal?
YES - Replace key slot. Removal and Installation.
NO - Repair or replace harness.