Diagnosis Procedure

SLIDING MOTOR


Diagnosis Procedure

1.CHECK SLIDING MOTOR POWER SUPPLY
1. Turn ignition switch OFF.
2. Disconnect sliding motor connector.
3. Turn the ignition switch ON.
4. Perform "Active test" ("SEAT SLIDE") using CONSULT-III
5. Check voltage between sliding motor harness connector and ground.





Is the inspection result normal?
YES - Replace sliding motor. (Built in seat slide cushion frame.) Exploded View.
NO - GO TO 2.
2.CHECK SLIDING MOTOR CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect driver seat control unit connector.
3. Check continuity between driver seat control unit harness connector and sliding motor harness connector.





4. Check continuity between driver seat control unit harness connector and ground.





Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace harness.
3.CHECK SLIDING MOTOR
Component Inspection.
Is the inspection result normal?
YES - Replace driver seat control unit. Removal and Installation.
NO - Replace sliding motor. (Built in seat slide cushion frame.) Exploded View.