Scan Tool Testing and Procedures

DIAGNOSIS SYSTEM (TRACTION MOTOR INVERTER)

CONSULT Function


APPLICATION ITEM







SELF DIAGNOSTIC RESULTS

Display Item List
Testing and Inspection.
How to Read DTC
DTC is displayed on "Self Diagnostic results" of CONSULT.
When DTC is currently detected, "CRNT" is displayed. If "PAST" is displayed, it shows a malfunction occurred in the past.The trip number of drive without malfunction of concerned DTC can be confirmed with "IGN
counter" inside "FFD".
How to Erase DTC
NOTE:
If the ignition switch is kept ON after repair operation, operate the ignition switch to OFF. Operate the ignition switch to ON again after waiting at least 10 seconds.
1.Touch "MOTOR CONTROL" of CONSULT.
2.Touch "Self Diagnostic Result".
3.Touch "Erase". (DTC memorized in electric traction motor inverter is erased.)
IGN Counter
The IGN counter is displayed in "FFD" and the number of times of satisfied "Driving condition A" is displayed after normal recovery of DTC.
- If malfunction (DTC) is currently detected, "0" is displayed.
- After normal recovery, every time "Driving condition A" is satisfied, the display value increases from 1 -> 2 -> 3...38 -> 39...
- When the number reaches to 40, DTC is erased.
NOTE:
The counter display of "40" cannot be checked.
FREEZE FRAME DATA (FFD)
The following vehicle status is recorded when DTC is detected and is displayed on CONSULT.
















DATA MONITOR