System Description

SYSTEM

METER EFFECT FUNCTION : System Description


HYBRID SYSTEM START EFFECT FUNCTION

When recognizing a hybrid system start, the combination meter controls the following items for producing the effect.
- Speedometer
- Tachometer
- Assist charge gauge
- Fuel gauge
- Meter illumination
Meter and Illumination Operations During Hybrid System Start Effect
The combination meter controls the following items during the hybrid system start effect.






Hybrid System Start Judgement
The combination meter judges "hybrid system start" and activates the hybrid system start effect only once when the following operational conditions are all satisfied.





NOTE:
The hybrid system start effect function ends if any one of the above conditions is lost during the activation of this function.
Signal Path
The combination meter judges "hybrid system start", according to the following signals and activates the hybrid system start effect function.






DRIVER WELCOME FUNCTION

BCM transmits a meter ring illumination request signal to the illumination meter when all the following operational conditions are satisfied. When receiving the meter ring illumination request signal from BCM via CAM
communication, the combination meter increases illumination brightness of the combination meter to the set brightness level in stages. After a certain period of time, the meter illumination gradually dims to be turned
OFF.





*: Close the driver side door with the intelligent key left inside the vehicle.
Timing Chart