Removal and Installation

TRUNK LID

TRUNK LID LOCK : Removal and Installation


REMOVAL

1.Remove the trunk lid finisher inner. Refer to "Removal and Installation" Removal and Installation.
2.Remove the trunk lid emergency opener lever.
3.Disconnect the trunk lid opener cable.
4.Disconnect the connector from trunk lid lock.
5.Remove the mounting bolts, and remove the trunk lid lock.

INSTALLATION

Install in the reverse order of removal.
NOTE:
- After installing, perform trunk lid fitting adjustment. Refer to "TRUNK LID ASSEMBLY : Adjustment" Adjustments.
- After installing, check the operation.