Without Plasmacluster System

INSPECTION AND ADJUSTMENT

WITHOUT PLASMACLUSTER SYSTEM : Foot Position Setting Trimmer


DESCRIPTION

Wind distribution ratio in FOOT mode can be set.
1.Begin self-diagnosis STEP-5 mode. Refer to "WITHOUT PLASMACLUSTER SYSTEM : Diagnosis Description" Without Plasmacluster System.
*1*2
2.Press fan (UP: +) switch (turn fan control dial clockwise) to set system in auxiliary mode.
NOTE:
*1: With left and right ventilation temperature separately system.
*2: Without left and right ventilation temperature separately system.
3.Press mode switch as desired.










NOTE:
When battery cable is disconnected or battery voltage is below 10 V, trimmer operation is canceled. Air distribution ratio set becomes that of initial condition.