Instrument Panel Console

Instrument Panel Console
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures
For additional information, refer to TAS Symbols Glossary
Removal

NOTE:
Removal steps in this procedure may contain installation details.
For additional information, refer to Battery Disconnect and Connect Battery Disconnect and Connect
For additional information, refer to Cooling System Draining, Filling and Bleeding
For additional information, refer to Air Conditioning (A/C) System Recovery, Evacuation and Charging Air Conditioning (A/C) System Recovery, Evacuation and Charging
For additional information, refer to Secondary Bulkhead Center Panel Secondary Bulkhead Center Panel
For additional information, refer to Floor Console Floor Console
For additional information, refer to Glove Compartment Service and Repair
For additional information, refer to Instrument Panel Lower Trim Panel Instrument Panel Lower Trim Panel
For additional information, refer to A-Pillar Trim Panel A-Pillar Trim Panel
For additional information, refer to Cowl Side Trim Panel Cowl Side Trim Panel
For additional information, refer to Steering Wheel Service and Repair

CAUTION: Be prepared to collect escaping coolant.

CAUTION: Take care not to damage the O-ring seals during installation.

Torque to: 9 Nm

Torque to: 30 Nm

Torque to: 4 Nm

Torque to: 12 Nm

Torque to: 9 Nm

Torque to: 20 Nm

CAUTION: Be prepared to collect escaping coolant.

CAUTION: Protect the surrounding paintwork to avoid damage.

CAUTION: Protect the surrounding trim to avoid damage.

Installation
1 To install, reverse the removal procedure.