Resonator: Service and Repair

Intake Air Resonator

Removal
1 Remove the engine cover. For additional information, refer to Engine Cover Service and Repair




2 LH side: Release the intake air resonator.
- Remove the bolt.
- Release the 2 clips.
- Disconnect the engine breather line.




3 RH side: Release the intake air resonator.
- Remove the bolt.
- Release the 2 clips.




4 Remove the intake air resonator.
- Release the clip.

Installation
1 Install the intake air resonator.
- Secure with the clips.
- Tighten the bolts to 10 Nm (7 lb.ft).
- Connect the engine breather line.
2 Install the engine cover. For additional information, refer to Engine Cover Service and Repair