Access Cover: Service and Repair

Engine Cover

Removal

CAUTION: Correct installation of the oil filler cap can be obtained by tightening the cap until an audible click is heard.

NOTE:
Naturally aspirated engine shown, supercharged engine is similar.
1 Remove the cover and disconnect the battery ground cable.
2 Open the hood.




3 Remove the oil filler cap.




4 Remove the engine cover.
- Release the 4 clips.

Installation
1 Install the engine cover.
- Position and secure the clips.
2
CAUTION: Correct installation of the oil filler cap can be obtained by tightening the cap until an audible click is heard.
Install the oil filler cap.
3 Close the hood.
4 Connect the battery ground cable and install the cover.