Removal and Replacement

Front Seat

Removal





1 Release the front seat.
- Position the front seat fully forwards.
- Remove the bolt covers.
- Remove and discard the 2 rear bolts.
2 Position the front seat fully rearwards.
3 Remove the cover and disconnect the battery ground cable. For additional information, refer to Specifications




4 With assistance, remove the front seat.
- Remove and discard the front 2 Torx bolts.
- Disconnect the 3 electrical connectors.

Installation
1 With assistance, install the front seat.
- Connect the electrical connectors.
- Install the new bolts and tighten to 40 Nm (30 lb.ft).
2 Connect the battery ground cable and install the cover. For additional information, refer to Specifications
3 Secure the front seat.
- Position the front seat fully forwards.
- Install the new bolts and tighten to 40 Nm (30 lb.ft).
- Install the bolt covers.