Radiator Splash Shield

Radiator Splash Shield

Removal
1
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.




2
NOTE:
Note the fitted position of the washers.
Remove the radiator splash shield.
- Remove the 21 Torx bolts.
- Remove the 2 screws.
3
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the 13 clips.




4 Remove the 2 air deflectors.
- Release the 2 clips.

Installation
1 Install the air deflectors.
- Carefully secure the clips.
2 Install the clips.
3 Install the radiator splash shield.
- Tighten the Torx bolts.
- Tighten the screws.