Rear Shelf: Service and Repair

Parcel Shelf
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures
For additional information, refer to TAS Symbol Glossary TAS Symbols Glossary
Removal
All vehicles
For additional information, refer to C-Pillar Lower Trim Panel C-Pillar Lower Trim Panel

Vehicles with electric rear blind





Vehicles without electric rear blind





All vehicles









NOTE:
Loosen the bolt, but do not fully remove.





NOTE:
Loosen the bolt, but do not fully remove.

















Installation
All vehicles





CAUTION: Make sure that the noise vibration harshness (NVH) material is correctly located.





CAUTION: Make sure that the wiring harness does not catch when installing the parcel shelf.





Torque to: 40 Nm









Torque to: 6 Nm
Apply gentle pressure.





Torque to: 6 Nm
Apply gentle pressure.





Vehicles with electric rear blind





Vehicles without electric rear blind





All vehicles





For additional information, refer to C-Pillar Lower Trim Panel C-Pillar Lower Trim Panel