Climate Control Assembly

Climate Control Assembly
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures
For additional information, refer to TAS Symbol Glossary TAS Symbols Glossary
Removal

NOTE:
Removal steps in this procedure may contain installation details.

NOTE:
LHD illustration shown, RHD is similar.

NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.

All vehicles

WARNING: Make sure to support the vehicle with axle stands.
1 Raise and support the vehicle.
For additional information, refer to Cooling System Draining, Filling and Bleeding - Vehicles With: Supercharger Cooling System Draining, Filling and Bleeding
For additional information, refer to Cooling System Draining, Filling and Bleeding - Vehicles Without: Supercharger Cooling System Draining, Filling and Bleeding
For additional information, refer to Cooling System Draining, Filling and Bleeding
For additional information, refer to Air Conditioning (A/C) System Recovery, Evacuation and Charging Air Conditioning (A/C) System Recovery, Evacuation and Charging
For additional information, refer to Cowl Side Trim Panel Cowl Side Trim Panel
For additional information, refer to Steering Column Steering Column
For additional information, refer to Instrument Panel Center Reinforcement Instrument Panel Center Reinforcement
For additional information, refer to Secondary Bulkhead Panel LH Secondary Bulkhead Panel LH

Vehicles with diesel engine
For additional information, refer to Secondary Bulkhead Panel RH Secondary Bulkhead Panel RH

CAUTION: Be prepared to collect escaping coolant.

All vehicles

NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.

Torque to: 9 Nm

CAUTION: Make sure that the component is correctly located on the locating dowels.

NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.