Clockspring Assembly / Spiral Cable: Service and Repair

WARNING: Do not turn steering wheel independently of steering box. Damage to the internal harness may occur, resulting in possible malfunction of SRS and steering wheel mounted switches.

Remove

1. Remove steering wheel. Refer to Remove and Refit Air Bag




2. Release SRS harness from clips.
3. Disconnect steering wheel multiplug.
4. Release 2 clips securing rotary coupler. Remove coupler.

Refit
5. Position rotary coupler. Engage clips.
6. Route SRS harness correctly. Secure to clips.

WARNING: Do not connect SRS multiplug/'shorting link' until drivers air bag module has been fitted.

7. Connect steering wheel multiplug.
6. Fit steering wheel. Refer to Remove and Refit Air Bag