P0335

DTC P0335
Crankshaft sensor circuit fault - no signal (Driving Cycle A)

Possible causes by suggested order of priority:
- Connectors C1033, C1004.
- Circuit integrity C1033/12 (KB) - C1004/2 (KB).
- Circuit integrity C1033/11 (BY) - C1004/1 (BY).
- Circuit integrity cable screen - ground.
- Crankshaft position sensor.
- Reluctor ring.
- ECM.

Connectors C1033, C1004.
- Check for connector not correctly latched, backed out pins, damaged pins, corroded pins

Circuit integrity C1033/12 (KB) - C1004/2 (KB).
- Check for open circuit, short circuit to ground, supply or other circuit, damaged or unlatched connector, intermediate connectors or headers

Circuit integrity C1033/11 (BY) - C1004/1 (BY).
- Check for open circuit, short circuit to ground, supply or other circuit, damaged or unlatched connector, intermediate connectors or headers

Circuit integrity cable screen - ground.
- Check for open circuit, short circuit to ground, supply or other circuit, damaged or unlatched connector, intermediate connectors or headers

Crankshaft position sensor.
- Crankshaft position sensor resistance.
- Ensure the crankshaft position sensor is correctly fitted.
PASS VALUES: 1300 to 1800 Ohms.

Reluctor ring.
- Ensure reluctor ring is correctly aligned.
- Ensure there are no damaged teeth on the reluctor ring.

ECM.
- No detail available for this fault