Rear Wiper Pivot Arm

Rear Wiper Pivot Arm

Special Service Tools






General purpose puller

100-005A (LRT-99-500A)

Removal





1 Noting the fitted position and using the special tool, remove the rear wiper pivot arm.
- Remove the nut cover.
- Remove the nut.
2
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the wiper blade.
- Release the clip.

Installation
1 To install, reverse the removal procedure.
- Tighten the nut to 15 Nm (11 lb.ft).