Condenser HVAC: Service and Repair

Condenser Core
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures

Removal

NOTE:
Removal steps in this procedure may contain installation details.
1 Disconnect the battery ground cable.
For additional information, refer to Specifications

WARNING: Make sure to support the vehicle with axle stands.
2 Raise and support the vehicle.
For additional information, refer to Cooling System Draining, Filling and Bleeding - Vehicles With: Supercharger
For additional information, refer to Air Conditioning (A/C) System Recovery, Evacuation and Charging
For additional information, refer to Hood Latch Panel Hood Latch Panel
For additional information, refer to Air Cleaner RH Air Cleaner RH
For additional information, refer to Air Cleaner Outlet Pipe RH Air Cleaner Outlet Pipe RH

Torque to: 9 Nm

Torque to: 8 Nm

CAUTION: Always protect the cooling pack elements to prevent accidental damage.

Installation
1 To install reverse the removal procedure.