C-Pillar Upper Trim Panel

C-Pillar Upper Trim Panel

Removal





1 Release the door aperture weatherstrip.
2 Release the font edge of the lower quarter trim panel.
3 Release the upper trim access cover.




4
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the C-pillar upper trim panel.
- Remove the Torx screw.
- Release the 2 clips.




5 Remove the 2 C-pillar retaining clips.

Installation
1 Install the clips to the C-pillar upper trim panel.
2 Install the C-pillar upper trim panel.
- Attach the safety belt.
- Secure with the clips.
- Tighten the Torx screw to 6 Nm (4 lb.ft).
3 Install the lower quarter trim panel
- Carefully secure the clips.
4 Install the upper trim access cover.
5 Install the door aperture weatherstrip.