Pinpoint Tests

Pinpoint Test

PINPOINT TEST G1217068p1 : Window(s) noisy during operation

G1217068t1 : Check the door window glass is secure
1 Remove the door window glass outer waist seal.
2 Check if the door glass installed correctly and secured to the door window regulator motor.
- Is the door window glass correctly installed and secure?

->Yes
GO to Pinpoint Test G1217068t2.

->No
Install a new door window glass as necessary. For additional information, refer to Front Door Window Glass Service and Repair
For additional information, refer to Rear Door Window Glass Rear Door Window Glass

G1217068t2 : Check the operation of the door window regulator motor
1 Remove the door window glass as necessary. For additional information, refer to Front Door Window Glass Service and Repair
For additional information, refer to Rear Door Window Glass Rear Door Window Glass
2 Operate the door window regulator four times.
- Does the door window regulator operate correctly (without noise)?

->Yes
Ensure that an anti-rattle pad (available from the parts department) is installed to the door window glass retaining bracket and installed correctly. For additional information, refer to Front Door Window Glass Service and RepairTest the system for normal operation. If the concern persists,
GO to Pinpoint Test G1217068t3.

->No
Install a new door window regulator motor as necessary. For additional information, refer to Front Door Window Regulator and Motor Service and Repair
For additional information, refer to Rear Door Window Regulator and Motor Service and Repair

G1217068t3 : Check that the door window glass seal is free from foreign material
1 Check for any foreign material or obstruction in the door window glass seal.
- Is the door window glass seal free from foreign material?

->Yes
GO to Pinpoint Test G1217068t4.

->No
Remove any foreign material from door window glass seal and lubricate the seal. Test the system for normal operation.

G1217068t4 : Check that the door window glass seal is installed correctly
1 Check that the door window glass seal is installed correctly.
- Is the door window glass seal installed correctly?

->Yes
GO to Pinpoint Test G1217068t5.

->No
Install the door window glass seal correctly. Test the system for normal operation.

G1217068t5 : Check that the door window glass seal is not worn in the channels
1 Visually check that the door window glass seal is not worn in the door channels.
- Is the door window glass seal worn in the channels?

->Yes
Install a new door window glass seal as necessary. Test the system for normal operation.

->No
Install the door window glass and adjust the door window glass. Test the system for normal operation.

PINPOINT TEST G1217068p2 : Window(s) inoperative (motor noise cannot be heard)

G1217068t6 : Check for door window regulator motor noise
1 Operate the door window regulator motor as necessary.
- Is there a noise from the door window regulator motor when operated?

->Yes
GO to Pinpoint Test G1217068t7.

->No
Install a new door window regulator motor as necessary. For additional information, refer to Front Door Window Regulator and Motor Service and Repair
For additional information, refer to Rear Door Window Regulator and Motor Service and Repair

G1217068t7 : Check that the door window glass seal is free from foreign material
1 Check for any foreign material or obstruction in the door window glass seal.
- Is the door window glass seal free from foreign material?

->Yes
GO to Pinpoint Test G1217068t8.

->No
Remove any foreign material from door window glass seal and lubricate the seal. Test the system for normal operation.

G1217068t8 : Check that the door window glass seal is installed correctly
1 Check that the door window glass seal is installed correctly.
- Is the door window glass seal installed correctly?

->Yes
GO to Pinpoint Test G1217068t9.

->No
Install the door window glass seal correctly. Test the system for normal operation.

G1217068t9 : Check that the door window glass seal is not worn in the channels
1 Visually check that the door window glass seal is not worn in the door channels.
- Is the door window glass seal worn in the channels?

->Yes
Install a new door window glass seal as necessary. Test the system for normal operation.

->No
Install the door window glass. Adjust the door window glass referring to the door window glass retaining bracket procedure at the end of this section (see below). Test the system for normal operation. If the concern persists, Test the system for normal operation.

PINPOINT TEST G1217068p3 : Slow or partial window operation

G1217068t10 : Check the operation of the door window regulator motor
1 Remove the door window glass as necessary. For additional information, refer to Front Door Window Glass Service and Repair
For additional information, refer to Rear Door Window Glass Rear Door Window Glass
2 Operate the door window regulator as necessary.
- Does the door window regulator operate correctly?

->Yes
GO to Pinpoint Test G1217068t11.

->No
GO to Pinpoint Test G1217068t14.

G1217068t11 : Check that the door window glass seal is free from foreign material
1 Check for any foreign material or obstruction in the door window glass seal.
- Is the door window glass seal free from foreign material?

->Yes
GO to Pinpoint Test G1217068t12.

->No
Remove any foreign material from door window glass seal and lubricate the seal. Test the system for normal operation.

G1217068t12 : Check that the door window glass seal is installed correctly
1 Check that the door window glass seal is installed correctly.
- Is the door window glass seal installed correctly?

->Yes
GO to Pinpoint Test G1217068t13.

->No
Install the door window glass seal correctly. Test the system for normal operation.

G1217068t13 : Check that the door window glass seal is not worn in the channels
1 Visually check that the door window glass seal is not worn in the door channels.
- Is the door window glass seal worn in the channels?

->Yes
Install a new door window glass seal as necessary. Test the system for normal operation.

->No
Adjust the door window glass referring to the door window glass retaining bracket procedure at the end of this section (see below). Test the system for normal operation.

G1217068t14 : Check the voltage to the door window regulator motor

NOTE:
The door window regulator motor can be removed from the regulator. Install a new door window regulator motor not the complete assembly for this concern.
1 Using a multimeter, check the voltage to the door window regulator motor.
- Is the voltage greater than 10 volts?

->Yes
Install a new door window regulator motor as necessary.

->No
Repair the wiring harness. Test the system for normal operation. If the concern continues, install a new door window regulator motor as necessary.

PINPOINT TEST G1217068p4 : Front door window glass bounce back

G1217068t15 : Check Window motor initialization
1 Initialize the door window motor. For additional information, refer to Door Window Motor Initialization Testing and Inspection
- Did the initialization work?

->Yes
Test the system for normal operation.

->No
GO to Pinpoint Test G1217068t16.

G1217068t16 : Check that the door window glass seal is free from foreign material
1 Check for any foreign material or obstruction in the door window glass seal.
- Is the door window glass seal free from foreign material?

->Yes
GO to Pinpoint Test G1217068t17.

->No
Remove any foreign material from door window glass seal and lubricate the seal. Test the system for normal operation.

G1217068t17 : Check that the door window glass seal is installed correctly
1 Check that the door window glass seal is installed correctly.
- Is the door window glass seal installed correctly?

->Yes
GO to Pinpoint Test G1217068t18.

->No
Install the door window glass seal correctly. Test the system for normal operation.

G1217068t18 : Check that the door window glass seal is not worn in the channels
1 Visually check that the door window glass seal is not worn in the door channels.
- Is the door window glass seal worn in the channels?

->Yes
Install a new door window glass seal as necessary. Test the system for normal operation.

->No
GO to Pinpoint Test G1217068t19.

G1217068t19 : Check the door window glass is secure
1 Remove the door window glass outer waist seal.
2 Check if the door glass installed correctly and secured to the door window regulator.
- Is the door window glass correctly installed and secure?

->Yes
Test the system for normal operation.

->No
Adjust the door window glass referring to the door glass channel setting procedure in this procedure. Test the system for normal operation. If the concern persists, install a new door window regulator motor as necessary. For additional information, refer to Front Door Window Regulator and Motor Service and Repair