Glove Compartment: Service and Repair

Glove Compartment
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures

Removal
1 Position the front seat fully rearwards.
2 Open the glove compartment to the service condition.





CAUTION: Make sure that excessive force is not used to release the glove compartment. Failure to follow these instructions may result in damage to the vehicle.
3 Release the glove compartment.





CAUTION: Make sure that excessive force is not used to release the glove compartment. Failure to follow these instructions may result in damage to the vehicle.
4 Release the glove compartment damper.
5 Remove the glove compartment.

Installation
1 To install, reverse the removal procedure.