Rear Quarter Trim Panel

Rear Quarter Trim Panel

Removal
1 Open the liftgate.
2 Release the liftgate aperture seal.




3 Release the rear quarter trim panel.
- Carefully release the 4 clips.




4
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the rear quarter trim panel.
- Disconnect the electrical connector.
5 Remove the quarter panel speaker from the rear quarter trim panel.
- Remove the 3 screws.




6 Remove the 4 clips from the rear quarter trim panel.

Installation
1 Install the 4 new clips to the rear quarter trim panel.
2 Install the rear quarter panel speaker to the rear quarter panel.
- Install the 3 screws.
3 Install the rear quarter trim panel.
- Connect the electrical connector.
4 Secure the rear quarter trim panel.
- Secure the 4 clips.
5 Secure the liftgate aperture seal.