Engine Oil: Service and Repair

Engine Oil Draining and Filling

NOTE:
Removal steps in this procedure may contain installation details.

WARNING: Make sure to support the vehicle with axle stands.
1 Raise and support the vehicle.
2 Remove the engine undershield.
For additional information, refer to Engine Undershield Engine Undershield
3 Remove the oil filter.
For additional information, refer to Oil Filter Element Service and Repair





WARNING: Avoid skin contact with the specified material.

CAUTION: Hot fluid.

CAUTION: Be prepared to collect escaping fluids.

NOTE:
Remove and discard the sealing washer.

Torque to: 20 Nm

NOTE:
Removal steps in this procedure may contain installation details.

CAUTION: Make sure that the component is clean, free of foreign material and lubricant.

CAUTION: Make sure that new sealing washers are installed.
1 To install, reverse the removal procedure.
2 Check and top-up the engine oil.