Pinout Values and Diagnostic Parameters
TERMINALS OF ECUTerminals Of Control Module/Pinouts (Part 1):
Terminals Of Control Module/Pinouts (Part 2):
1. AIR CONDITIONING AMPLIFIER
a. Waveform 1:
1. Measure the waveform between terminal BLW (A7-9) of the A/C amplifier assembly and body ground.
OK: Waveform appears as shown in the illustration.
HINT: Waveform cycle varies with the blower level.
Terminals Of Control Module/Pinouts (Part 1):
Terminals Of Control Module/Pinouts (Part 1):
2. HYBRID VEHICLE CONTROL ECU
a. Waveform A:
1. Measure the waveform between terminal CLK (H33-14) of the hybrid vehicle control ECU and body ground.
OK: Waveform appears as shown in the illustration.
HINT: Waveform cycle varies with the communication contents.
b. Waveform B:
1. Measure the waveform between terminal ITE (H33-15) of the hybrid vehicle control ECU and body ground.
OK: Waveform appears as shown in the illustration.
HINT: Waveform cycle varies with the communication contents.
c. Waveform C:
1. Measure the waveform between terminal ETI (H33-16) of the hybrid vehicle control ECU and body ground.
OK: Waveform appears as shown in the illustration.
HINT: Waveform cycle varies with the communication contents.
Terminals Of Control Module/Pinouts:
3. INTEGRATION CONTROL & PANEL ASSEMBLY
4. MULTI DISPLAY ASSEMBLY