P0617
DTC P0617 Starter Relay Circuit HighDTC Detection Condition:
DESCRIPTION
HINT: Refer to cranking holding function circuit.
If the vehicle is being driven and the ECM detects the starter control signal (STA), the ECM concludes that the starter control circuit is malfunctioning. The ECM will turn on the MIL and a DTC is set.
Monitor Strategy:
Typical Enabling Conditions:
Typical Malfunction Thresholds:
MONITOR DESCRIPTION
Wiring Diagram:
Step 1:
Step 1(Continued)-4:
Step 4(Continued)-5:
INSPECTION PROCEDURE
HINT:
- The following troubleshooting flowchart is based on the premise that the engine is cranked normally. If the engine will not crank, proceed to the problem symptoms table.
- Read freeze frame data using the intelligent tester. Freeze frame data records the engine conditions when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was running or stopped, if the engine was warmed up or not, if the air fuel ratio was lean or rich, and other data from the time the malfunction occurred.