C1779

DTC C1779/79 Crankshaft Position Sensor Circuit

DESCRIPTION

DTC Detection Condition:

The suspension control ECU receives the engine speed signal from the ECM.

When inspecting by test mode, the suspension control ECU scans changes in the signals. If there is no change, it outputs the test DTC (C1797/97).

HINT: When DTC C1797/97 is output, follow the same procedure as that of DTC1779/79.

Wiring Diagram:

Step 1:

Step 1(Continued)-3:

Step 4:

INSPECTION PROCEDURE

HINT: Start the inspection from step 1 when using the intelligent tester, and start from step 2 when not using the intelligent tester.