B1471

DTC B1471/71 A/C Inverter High Voltage Power Resource System Malfunction

DESCRIPTION

DTC Detecting Condition:

The A/C inverter assembly monitors power voltage from the main battery in the circuit. It stops compressor control and outputs the DTC when the monitored voltage is outside the specified range.

The output DTC is memorized as previous trouble. Compressor control may not resume unless the ignition switch is turned off.

CAUTION:
- Wear electrically insulated gloves and pull out the service plug grip before inspection as procedures may require disconnecting high-voltage connectors. Be sure to carry the removed service plug grip because other workers may install it by mistake.
- Do not touch the high-voltage connectors or terminals for 5 minutes after the service plug grip is removed.

NOTE: The hybrid control system and air conditioning system output DTCs separately. Inspect DTCs following the flow chart for the hybrid control system first if any DTCs from those system are output simultaneously.

Wiring Diagram:

Step 1:

Step 2-3:

Step 3 (Continued)-4:

Step 4 (Continued):

INSPECTION PROCEDURE