DTC 58-10

NAVIGATION SYSTEM: 58-10: Gyro Error

DTC 58-10 - Gyro Error

DTC 80-10 - Gyro Error

DESCRIPTION





INSPECTION PROCEDURE
HINT: After the inspection is completed, clear the DTCs.

PROCEDURE

1. CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)





(a) Enter the "Vehicle Sensors" (Navigation Check Mode) .
(b) Check the gyro voltage.
Standard voltage:
0.1 to 4.5 V
NG -- REPLACE NAVIGATION ECU
OK -- Continue to next step.
2. CLEAR DTC
(a) Clear the DTCs .
NEXT -- Continue to next step.
3. RECHECK DTC
(a) Recheck for DTCs and check if the same trouble occurs again.
HINT: If DTCs are detected frequently, replace the navigation ECU.

OK:
Malfunction disappears.
NG -- REPLACE NAVIGATION ECU
OK -- END