Hazard Warning Switch: Testing and Inspection

LIGHTING: HAZARD WARNING SWITCH: INSPECTION

INSPECTION

1. INSPECT HAZARD WARNING SWITCH (w/o Navigation System)
(a) Remove the center cluster integration switch assembly.






(b) Measure the resistance according to the value(s) in the table below.
Resistance:





If the result is not as specified, replace the center cluster integration switch assembly (hazard warning switch).
2. INSPECT HAZARD WARNING SWITCH (w/ Navigation System)
(a) Remove the multi-display assembly.






(b) Measure the resistance according to the value(s) in the table below.
Resistance:





If the result is not as specified, replace the multi-display assembly (hazard warning switch).